Yamaha YZF600 R6
08-23
YEC kit ECU tuning   We've probably tuned about 100 YEC ecu's  - more than most anybody else around.

 Rates and applications
Hybrid Ceramic Wheel Bearings Oil Additive
 

 

 ECU reflashing
  Remove / modify speed limiters
Modify ignition timing
Unleash your topend!


Congrats Anne Roberts and Michael Barnes at Road Atlanta!

Entered 4 races and got 4 podiums. Very successful weekend and ran my fastest time in last lap of last race. Can't thank Michael Barnes enough for all the help on myself and the bike. The only times I've gotten to ride this year were at all the MotoAmerica races, so it was great to be back in a relaxed atmosphere banging bars with my WERA buddies at the N2 track day Friday and the weekend races. Bike ran really well thanks to Marc Wayne Salvisberg's tune and we were able to make some rear grip progress with the help of Craig 'Huey' Stewart. Dunlop 7455 compound DOT's were working well too. Not sure when I'll be able to ride next, but we are planning on attending the GNF in October! Until then, lots more dirt tracking at night after work and at the Russell Ranch. Thanks everybody


Anne Roberts and Michael Barnes Supersport R6 tuned by Wheelsmith / Factory Pro before Laguna Seca 2016

 


Congratulations to Triple Crown's
Stefano Mesa

Stunning back to back 1st and 2nd place finishes in the hard fought, high speed AMA Supersport class on his Factory Pro Tuned, Triple Crown Industries Yamaha R6 at Road America!

Hybrid Ceramic Wheel Bearing kit
http://image2.cccme.org.cn/i_supply/2010/7/6/2010122602022725549_125637846.jpghttp://image2.cccme.org.cn/i_supply/2010/7/6/2010122602022725549_125637846.jpg

$249.85
intro special

reg $349.79

4 bearing kit
2 front and 1 left rear wheel + 1 sprocket carrier
pn: BE-HYCER-Y82-03-19
1. Choose your shipping method

2.
Hybrid Ceramic Wheel  Bearing kit

4 bearing set

 2 front wheel bearings
1 left rear wheel bearing
(use stock right rear bearing)
1 sprocket carrier bearing

Why no RH rear wheel bearing?
Because it's a needle bearing and not a very good application  for a ceramic roller.

Otherwise, Tough steel races and almost  friction free ai3n4 ceramic balls.

Bearings are pregreased and ready to use.
Bearings have rubber seals that are easy to remove if desired.


marc@factorypro.com


415 883-5620




(sample picture only)
Pro Shift kit

inc
 Hybrid Ceramic Microbearing Detent Arm and heat treated Shift Spring

pn: shft-pro-Y82-cer
 
Hybrid Ceramic microbearing arm with larger roller bearing

replaces oem: 2C0-18140-00 and 90506-14003
$159.95
w / hybrid ceramic bearing and Factory Pro Shift Spring
1. Choose your shipping method
2. 





Upgrade your stock detent arm to our Hybrid Ceramic Microbearing Detent Arm.

Helps eliminate missed shifts and false neutrals.

Shifts quicker. More power delivered per lap.

Helps not miss overly quick shifts and overly lazy shifts.

Proven concept in AMA roadracing and off road racing.

Installs on the right side, just  behind the clutch basket.
 Simple.




(sample picture only)

 Hybrid Ceramic
Microbearing Detent Arm
pn: shft-arm-Y2C0-CER
 
Hybrid Ceramic microbearing arm.

replaces oem: 2C0-18140-00
$89.95
w / hybrid ceramic bearing
1. Choose your shipping method
2. 





Upgrade your stock detent arm to our Hybrid Ceramic Microbearing Detent Arm.

Helps eliminate missed shifts and false neutrals.

Shifts quicker. More power delivered per lap.

Helps not miss overly quick shifts and overly lazy shifts.

Proven concept in AMA roadracing and off road racing.

Installs on the left side, just  above the shifter.
 Simple.

415 883-5620


marc@factorypro.com
Unleash your bike's hidden power






 ECU Reflash - unrestrict non-CA bikes




$425 Flash Feedback


Poway Motorcycles

"Hi Marc,
We are at Willow Springs and Dave's (2009) R6 is running awesome.
Dave has no complaints at this point and it was easy (at part throttle) to ride now. Thanks!"
Bill

They had used a different flash service. With that, power at high rpm was improved but track rideabilty wasn't good.
The Factory Pro Power Flash delivered the same high rpm power as their old $200 flash but provided seamless part throttle control for the smoothest cornering.
Marc

415 883-5620

marc@factorypro.com

 

Motousa developed race Flashing

$425
Special $375

(recommended for best low, mid and topend power and smoothest part throttle operation)

As they say. "The Devil is in the Details."

- Custom Remove Throttle-by-Wire restrictions
- Custom engine braking reduction
- Disable Injector Decel Cut
- Custom Removal of all gear based or speed dependent restrictions, our Electronic TRE
-Custom Optimized timing maps for 91+ octane
- Disable AIS valve (always closed)
- Reduce Fan Temps to 205°F
- Default to A-mode
(415) 472-4962



Factory Pro R6 Feedback

rider: Anne Roberts
class: 600 Superstock
crew: Michael Barnes and Tony Pogue
date: july 2016
track: Laguna Seca

"Faster now that you tuned her bike."
"She says it runs awesome.Thanks."

"Oh yeah! The bike is finally running just the way I like it thanks to Factory Pro Tuning."
Oil Additive


$30 / 4oz bottle
Anti Friction
4 oz treats 3 to 5 qts synthetic oil

pn: LU-NUMBER-EIGHT-4
1. Choose your shipping method

2.
As I recall -

After a race's worth of running over 100 AMA and WERA bikes, we gained from 2% to 3% power,

The least I saw was 1% (JR's super loose built engine) and the most I ever saw was 4% (on a super tight street  built engine).

The other 98 bikes picked up 2% to 3% power - with most 2% and  2.5%

Lasts 2 and up to 3 oil changes (tapering off in effect).

Number
 Eight
YEC ECU, 2008 yzf600 R6

 

08 YEC_yms2-1224-9694-3972.zip

08 YEC_usb_driver.zip

 We tune YEC ECU's using the EC997 dyno -
No power commander required.

call 415 883-5620

M-F, 9-5

Sponsor Triple Crown Racing

( below, unverified as of 2008, 04, 13)

RE: Translogic (same as Dynojet)  Quickshifter:
Just a quick followup, the Dynojet tension sensor does indeed work. Connect the DJ blue wire to the YEC blue, the DJ/green to the YEC red/white.  I have the trigger voltage set to 2.5v in the YEC software, everything works perfect.

Notes:
That's not tested yet. It's here so I don't lose it -  Marc

...................................................................

Wire sub harness set  13S-F8610-70

1 that goes to ecu - 3 wire.
1 that goes to engine relay kickstand, etc.
1 that goes to ?? has lots of "things" on it.

Jeff Jones

 
 
 Ignition trigger Application Description
Purchase this Yamaha 2C0-81673-01-00 ROTOR --- ROTOR
This Yamaha 2C0-81673-01-00 ROTOR is also used on these models and components:
2010 YZF-R6 - YZFR6ZW ELECTRICAL 1

 

True Rear Wheel Horsepower Factory EC997 Eddy Current Dynamometer



Factory Pro Support Rider
Kent Larson at Gratton Raceway
(Kent wrote the software for the EC997 SAE Correction Tables)


EC997 Eddy Current Dyno in operation in Switzerland at 
Pichard Racing
 Switzerland and France

Factory Pro Tuning Center locations
 click here!

 


 Z1 CycleTech | Performance Parts and Accessories for the Hard-core: street and race
 Ontario Canada

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

no fax

Factory Pro
101c Roblar Drive
Novato, CA
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
 info@factorypro.com

Product Support /Tech SECTION
 click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

 restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 
 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
  

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win		 The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444
Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.
Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com		 Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert
Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.