File:LegendsCars4wide2010BeaverDamRaceway.jpg FJ1100 / FJ1200 / XJR1200 / XJR1300
Legend Car Series 

 

fj1100 / fj1200 / fjr1200 / xjr1300 Race Car Performance Package

Package Price

$499.95

save $107.90

1. Choose your shipping method

2.




Long Boy Fuel Screw Kit - easier adjust idle and part throttle fuel $89.95
CRB-Y08-3.0- LEGEND Carb Jetting kit - cleanest carburetion (Legend Legal) $179.95
Emulsion Tubes (Needle jets)  (Outlaw legal only)
HDJ - High Dispersement Jet fuel atomization feature - better atomization and better power.
$168.00
Pro Shift Kit - F-Pro hd shift spring and F-Pro Microbearing Shift Arm - stop missing 2nd gear.
(it's a safety mod - check legality for your sanctioning organization )
$179.95
Package Total $607.85
Package Savings $107.90
Sale Total $499.95

$499.95
Extended Fuel Screws

Long Boy Fuel Screw Kit  $89.95
pn: 3020m1

 with 4 new extended screws, springs, washers and o-rings.

1. Choose your shipping method

2.

"Long Boy"
Finger and screwdriver adjustable extended Fuel Screw

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screws for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screws to adjust fuel screws for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier!

Installation:
Remove old short stock fuel screws, old o-rings, old washers and old spring. The o-ring might be stuck in the carb, so, take a light and make sure it's really out if it didn't come out with the screw (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

Each screw assembly comes with:
4 Long Boy fuel screws 
 4 new o-rings
4 new washers
4 new springs

              

Legend Car Series


CRB-Y08-3.0- LEGEND
$179.95
1. Choose your shipping method
2.
 

 

This is the kit that "They used".

Comparison to dj kit: Better driveability when properly tuned.

Hint: Use the HDJ tubes.......

Emulsion Tubes - drop-in  HDJ style



Yamaha,   FJ1200 / xjr1200 / xjr1300

replaces pn:   50h-14141-92-00 and similar

CRZ-EMU-100112k  $168 / 4pcs

1. Choose your shipping method.
 
2.



Stock Replacement needle jets WITH patented

HDJ :High Dispersement Jet fuel atomization feature.

The F Pro bit of kit that makes a car scream.

Factory Pro

Longer lasting
nickel plated
replacement emulsion xjr1200 and xjr1300 tubes in stock

The usual solution for poor mileage and overrich low rpm running and possibly poor high rpm power

These are the tubes "they" were talking about.

Transmission Shift Improvement


(sample pic only - not actual xjr parts)
 

SHFT-PRO-YAM-fjr1300  
 $179.95
xjr1300 99-15

(special order - add 2-3 weeks)

replaces original parts:
detent arm: 5RT-181400-00-00
shift spring: 90508-233B5-00 and 90508-233B0-00

1. Choose your shipping method.
 
2.

Pro Shift Kit

 

Low friction
Hybrid ceramic Microbearing Detent Arm

and

F-Pro special Shift spring

 

 

Quicker shifts.

Fewer missed shifts

Perfect for cars with heavy shift linkages

email here

Now that you've replaced the 2nd gear, it's mate and it's shift fork - Install this kit to make 2nd gear stay alive for years. Oh - nicer shifting, too./font>

IIncludes: Factory Pro Microbearing Detent Arm, Heavy duty detent spring and gasket. Makes shifting more positive at the expense of slightly stiffer shift lever action. The stronger detent spring rotates the shift drum faster, so the gears are more likely to engage under quick shift conditions. The Microbearing eliminates much friction, allowing the shift drum to rotate quicker for fewer missed shifts. Especially helpful in decreasing the 2nd gear and shift fork wear that bikes with large, heavy transmission gears are so well known for.

Oil Additive


$30 / 4 oz bottle

Anti Friction
4 oz treats 3 to 5 qts synthetic oil

pn: LU-NUMBER-EIGHT-4
1. Choose your shipping method
2.
As I recall -

We ran over 100 AMA and WERA bikes, we gained between 2% to 3% power.

The least I saw was 1% (JR's super loose built race engine) and the most I ever saw was 4% (on a super tight street  built engine).

The other 98 bikes picked up 2% to 3% power - with most 2% and  2.5%

Lasts 2 and up to 3 oil changes (tapering off in effect).

Helps highway mileage.

Number
 Eight

Tools



TL-float height gauge   $59.95

1. Choose your shipping method. 
2.

The only way to accurately measure float heights. Works on nearly every carburetor.
More information on how to set floats, resultant fuel level, it's effect on low rpm fuel delivery, pictures.....
Float Height Page

 
     

 

Tech Tidbits

 

Float Height Measuring

"touching, but not compressing the float valve spring"

Needle Jet wear
(sometimes called "worn emulsion tubes)
Inspect your brass needle jets for wear when you take out the needles. If the needle jets have oval wear pattern, they will allow excess fuel to pass by the needle causing excess low speed richness.
The fuel will also consist of more, large drops, rather than small drops. Large drops of fuel tend to drop out of the airflow and not burn.
Check out Tech Section for "Needle Jets, Mikuni, worn"

Tech



Go to General Technical Support

 

 

 

 

 

 

 

 

 

 

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

no fax

Factory Pro
101c Roblar Drive
Novato, CA
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 

 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
 


Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.

Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com
Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert

Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.