CRB-S26-1.0$79.95
|
STD drop-in carb
recal kit
When you use the stock airbox.
Adds more low-end / midrange, if the proper
main jet is selected, more top-end power. Easy to install and tune -
no slide drilling.
This kit will allow tuning for each individual bike and bolt on exhaust
system.
This is the kit of choice - pulling stronger at part throttle and at
throttle.
Call 800 869 -0497
|
CRB-S26-3.0$79.95
|
STD drop-in carb
recal kit
When you remove the airbox.
Adds more low-end / midrange, if the proper
main jet is selected, more top-end power. Easy to install and tune -
no slide drilling.
This kit will allow tuning for each individual bike and bolt on exhaust
system.
This is the kit of choice - pulling stronger at part throttle and at
throttle.
Call 800 869 -0497
|
Long Boy Fuel Screw (4030m)
pn: fuel screw, Volusia
$24.95 / set of ONE
|
"Long Boy"
Finger adjustable extended Fuel Screw
Frustrated with trying to find an "almost 90 degree"
screwdriver to fine adjust your fuel screw for best idle and
cruise?
Use Factory Pro's new "finger adjustable" fuel screw to adjust fuel
screw for best throttle response. Traveling to high altitude? It's
easy to lean out the lowend temporarily.
Make your life easier!
Installation:
Remove old short stock fuel screws, old orings, old washers and old
spring. The o-ring might be stuck in the carb, so, take a light and
make sure it's really out if it didn't come out with the screw (or
you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep
the old parts for "spares".
1 Volusia 800 set comes with:
1 Long Boy fuel screw CRZ-SCR-4030-M
1 new oring
1 new washer
1 new spring
(only one screw included for Volusia)
|
