CRB-H01-1.0  $139.95
(87-89 only)

IGNITION ADVANCER STRONGLY RECOMMENDED

Standard drop-in carb kit

Easy to install and tune - no slide drilling
Adds more low-end / midrange, if the proper main jet is selected, more top-end power.
This is one of the kits that we made our reputation on - in fact the first jet kit we ever made.
Won lots of races - used by nearly every top team in the USA except American Honda's
(I'm pretty sure....).

AMA 600 Supersport Winner!
1989 Sears Point!
David Deveau: rider

Standard drop-in carb kit

CRB-H01-3.0   $139.95
(87-89 only)

IGNITION ADVANCER STRONGLY RECOMMENDED

Easy to install and tune - no slide drilling
Adds more low-end / midrange, if the proper main jet is selected, more top-end power.
This kit gives more power everywhere, as compared to stock airbox or any Config 10 / Stage 1 kit.
This is also one of the few "Config 30" kits that still uses the airbox - not individual air filters, like other #30 kits. The airbox lid is modified for increased air intake.
This is one of the kits hat we made our reputation on - in fact the first jet kit we ever made.
Won lots of races - used by nearly every top team in the USA except Honda's (I think....).

Standard drop-in carb kit

CRB-H03-1.0   $139.95
(90 only)

IGNITION ADVANCER STRONGLY RECOMMENDED

Standard drop-in carb kit

Easy to install and tune - no slide drilling!
Adds more low-end / midrange, if the proper main jet is selected, more top-end power.
This is one of the kits that we made our reputation on - in fact the first jet kit we ever made.
Won lots of races - used by nearly every top team in the USA except Honda's (I think....).

Standard drop-in carb kit

CRB-H03-3.0   $139.95
(90 only)

IGNITION ADVANCER STRONGLY RECOMMENDED

Standard drop-in carb kit

RTR-HON-1-06    $109.95
("06" is the suggested rotor)
(87-88 only)
(includes gasket)
also: -2, +2 and +4 degrees

Easy 1/2 hour bolt-on - Only installs one way

Improves power at all rpm's and throttle positions AND raises rev limit 200 to 300 rpm higher! Pretty significant power boost.
The first rotors, in 1987, were made were made by welding up material on the edge of the stock trigger points, then hand grinding a duplicate edge and trimming the trailing edge to a perfect 2.5mm trigger point. It took 3 hours to make the first one!

Ignition Advance Kit

(89 only)
RTR-HON-1-04   $109.95
(includes gasket)

Easy 1/2 hour bolt-on - Only installs one way

Improves power at all rpm's and throttle positions AND raises rev limit 200 to 300 rpm higher! Pretty significant power boost.
The first rotors, in 1987, were made were made by welding up material on the edge of the stock trigger points, then hand grinding a duplicate edge and trimming the trailing edge to a perfect 2.5mm trigger point. It took 3 hours to make the first one!

Ignition Advance Kit

(90 only)
RTR-HON-6-04  $109.95
(includes gasket)

Easy 1/2 hour bolt-on - Only installs one way

Improves power at all rpm's and throttle positions AND raises rev limit 200 to 300 rpm higher! Pretty significant power boost.
The first rotors, in 1987, were made were made by welding up material on the edge of the stock trigger points, then hand grinding a duplicate edge and trimming the trailing edge to a perfect 2.5mm trigger point. It took 3 hours to make the first one!

Ignition Advance Kit

SHFT-PRO-HON-1  $139.95
(includes arm, spring and clutch gasket)

Stage 1  - the Pro Shift kit

Make shifting quicker and virtually eliminate missed shifts. Helps address missed shifts caused by poor shift detent profile.
Note- This kit will NOT fix rounded gear engagement dogs! It will help damage NOT occur to good gears caused by missing shifts.
The same kit that most AMA teams used "back in the day".

It's budget priced, effective and requires somewhat more foot pressure to shift.

Requires clutch assembly removal - including complete clutch basket's big nut. An air or electric impact wrench is "the way" to go.
A shop would bill 2-2.5 hours.

A great time to do this is when you are replacing clutch plates as you are "right there".

Trans Detent Arm Kit

User's comments

Steven Gregg
NZ

SHFT-STAR-H01    $139.95

in stock

Stage 2  -  Evo Shift Star kit

(add-on to the Stage 1 Pro Kit)

THE ULTIMATE IN Quick, reliable SHIFTING

Make shifting MUCH quicker and virtually eliminate missed shifts. Helps address missed shifts caused by poor shift detent "star" profile. MUCH more consistent shifting!
Not at liberty to disclose WHO used this kit on their F4's.........

User's comments

Install directions page