BMW F650 Funduro          1993 to 2000

 

 


CRB-BM06-1.0
$89.95

1. Choose your shipping method

2.

STD drop-in carb recal kit

Best "drop-in" kit. Boosts power a bit at full throttle, improves throttle response and wheelie ability. Definitely pulls harder out of 2nd and 3rd gear corners.
Finely honed to perfection - the Low Inertia EC997 Eddy Current allows us to discern even the difference between individual cylinders main jet requirements - unlike lesser dynes!

Factory Pro Carb Recalibration Kit

final vehicle configuration base vehicle setup notes click on image to view
Carb Recal Kit installed
(just jets and 2 needles!)
stock air filter and
airbox and inlets,
stock exhaust
Base Test
all stock carburetion,
air filter and
airbox and inlets,
stock exhaust
Improvements:  Power
midrange:    +7%-10%
Improvements: Drivability
Warms up quicker, has more "snap" throttle response, smoother running, reduced detonation with poor fuels, runs cooler.


see below for details on this dyno chart
**True Rear Wheel HP Scale Description **

Lazer Slip-on
Carb Recal Kit,
stock air filter with intake snorkel removed

Base Test
all stock carburetion,
air filter and
airbox and inlets,
stock exhaust

Improvements:  Power
top end power:   +10%
midrange:     +7%-10%
Improvements: Drivability
Wheelies better. Runs well at low rpm


Q
xXxXx
x   xxx   x
x    xxxx    x
xxx
x x
x x

**True Rear Wheel HP Scale Description **

Remus Slip-on
Carb Recal Kit,
stock air filter with intake snorkel removed

 

Base Test
all stock carburetion,
air filter and
airbox and inlets,
stock exhaust

Improvements:  Power
top end power:   +xx%
midrange:     +x%-xx%
Improvements: Drivability
xxxxx

under construction

Q
xXxXx
x   xxx   x
x    xxxx    x
xxx
x x
x x

**True Rear Wheel HP Scale Description **

Item description
Carb Recalibration Kit
CRB-BM06-1.1-TI
Ti ProKit carb recal kit desc.
$89.95 USD
Boosts power at full throttle, even when used with a stock exhaust system. Improves throttle response and wheelie ability. Definitely pulls harder out of 2nd and 3rd gear corners. A should do for maximum performance with or without an aftermarket exhaust slip-on or system.
Snappier engine response throughout the rpm range.

The first test was done using a stock airbox, air filter, intake restrictors and the stock exhaust system - to show what just the Factory Pro Carb Recal Kit will do - all by itself.
Power at high rpm will be improved as much as the low and midrange was improved if you add a freer flowing exhaust system. Additionally, for the inveterate tinkerers, there's a bit more power to be had by opening up the airbox inlet restriction - it'll just take a bit of juggling with larger main jets!
Marc

 

 

Looking for your idle mixture screw?  Here is where it is located:


This kit was developed on the same EC997a Eddy Current dyno that developed the K59-1.7-RK ZX-6R RaceKit (Muzzy and Kinko's choice), the Y73-1.7-RK YZF750 (Vance and Hines choice), S37-1.7-RK GSXR750, Suzuki of France and most of America's privateer racers choice)...

Engine
Type water-cooled single-cylinder 4-stroke
Bore x stroke 100 mm x 83 mm
Displacement 652 cc
Compression ratio 9.7:1 (claimed)
Fuel required 92 octane, unleaded
Horsepower @ crankshaft 48 Bhp @ 6,500 rpm (claimed)
Torque @ crankshaft 41 lb.-ft. @ 5,200 rpm (claimed)
Horsepower @ rear wheel / True Rear Wheel HP Scale 36.6 Bhp @ 6,500 rpm (SAE corrected)
Torque @ rear wheel / True Rear Wheel HP Scale 33.8lb.-ft. @ 5,200 rpm (SAE corrected)
Valve Gear DOHC, chain driven with bucket tappets
Valves 36 mm intake
31 mm exhaust
Valve Timing

intake opens 19 BTDC
intake closes 43 ABDC
exhaust opens 45 BBDC
exhaust closes 17 ATDC

Valves per cylinder four, 2 intake, 2 exhaust
Camshafts double overhead cams
Engine oil capacity 2.2 quarts of SF, SG or SH motor oil, also w/CC or CD
Engine oil filter micronic paper element
Carburetion 2x 36mm Mikuni BST 33 B316 CV style carburetors
Ignition CDI
Cooling system water cooled
 

 

 

Absolutely NO carb parts sold in California.

New and improved Suzuki Teka SFI  2

with new TPS display and "MMT" Memory Module Tuner

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
101c Roblar Drive
Novato, CA
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web

          

 

 

 

LINKS
EFI and Carb Tuning - Most all FI and carb tuning

by Wheelsmith Racing

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA.

 8 locations

 800-362-0808
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.